Knowledge centre
Sheet dimensions, tolerances and minimum ply counts follow GOST 3916.1-2018. Pack specifications use our production data.
We are open to experimental projects and plywood with special requirements for tolerances, veneer grain direction, surface finish or adhesive composition. Production feasibility and material specifications are discussed individually.
Pack volumes.
Sheet size 1525 × 1525 mm · thicknesses 3–40 mm.
| Thickness | Sheets per pack | Sheet volume, m³ | Pack volume, m³ | Average weight | Pack height |
|---|
Volume excludes packaging. Weight is approximate. For 24–40 mm plywood, weight is estimated from the average density of known packs; height uses sheet thickness and the average additional height of known packs.
Sheet dimensions and ply counts.
Sheet size: 1525 × 1525 mm. Length and width tolerance: ±4.0 mm.
NSH: unsanded plywood. SH2: sanded on both sides.
Unsanded plywood
| Thickness, mm | Minimum ply count | Thickness tolerance, mm | Thickness variation, mm |
|---|---|---|---|
| 3 | 3 | +0,4 / −0,3 | 0,6 |
| 4 | 3 | +0,8 / −0,4 | 1 |
| 6 | 5 | +0,9 / −0,4 | 1 |
| 6,5 | 5 | +0,9 / −0,4 | 1 |
| 8 | 6 | +1 / −0,5 | 1 |
| 9 | 7 | +1 / −0,5 | 1 |
| 10 | 7 | +1,1 / −0,6 | 1 |
| 12 | 9 | +1,1 / −0,6 | 1 |
| 15 | 11 | +1,2 / −0,7 | 1,5 |
| 18 | 13 | +1,3 / −0,8 | 1,5 |
| 20 | 14 | +1,4 / −0,9 | 1,5 |
| 21 | 15 | +1,4 / −0,9 | 1,5 |
| 24 | 17 | +1,5 / −1 | 1,5 |
| 27 | 19 | +1,6 / −1,1 | 2 |
| 30 | 21 | +1,7 / −1,2 | 2 |
| 36 | 29 | +1,88 / −1,38 | 2 |
| 40 | 33 | +2 / −1,5 | 2 |
Plywood sanded both sides
| Thickness, mm | Minimum ply count | Thickness tolerance, mm | Thickness variation, mm |
|---|---|---|---|
| 3 | 3 | +0,3 / −0,4 | 0,6 |
| 4 | 3 | +0,3 / −0,5 | 0,6 |
| 6 | 5 | +0,38 / −0,58 | 0,6 |
| 6,5 | 5 | +0,4 / −0,5 | 0,6 |
| 8 | 6 | +0,44 / −0,64 | 0,6 |
| 9 | 7 | +0,4 / −0,6 | 0,6 |
| 10 | 7 | +0,5 / −0,7 | 0,6 |
| 12 | 9 | +0,5 / −0,7 | 0,6 |
| 15 | 11 | +0,6 / −0,8 | 0,6 |
| 18 | 13 | +0,7 / −0,9 | 0,6 |
| 20 | 14 | +0,8 / −1 | 0,6 |
| 21 | 15 | +0,8 / −1 | 0,6 |
| 24 | 17 | +0,9 / −1,1 | 0,6 |
| 27 | 19 | +1 / −1,2 | 1 |
| 30 | 21 | +1,1 / −1,3 | 1 |
| 36 | 29 | +1,28 / −1,48 | 1 |
| 40 | 33 | +1,4 / −1,6 | 1 |
For thicknesses outside Table 2, tolerances use the standard formulas: NSH +(0.8 + 0.03 × S) / −(0.3 + 0.03 × S); SH2 +(0.2 + 0.03 × S) / −(0.4 + 0.03 × S), where S is nominal thickness in millimetres.
GOST 3916.1-2018 · Tables 1 and 2 ↗